https://www.jinpinlub.net/pt Fornecedor de bombas de palhetas hidráulicas e válvulas hidráulicas Fri, 20 Jun 2025 06:10:07 +0000 pt-PT de hora em hora 1 https://wordpress.org/?v=6.9.4 https://www.jinpinlub.net/wp-content/uploads/2025/05/cropped-WordPress_blue_log-32x32.png https://www.jinpinlub.net/pt 32 32 https://www.jinpinlub.net/pt/product/wholesale-300bar-t67dc-series-parker-hydraulic-double-vane-pump-oem-odm/ Mon, 16 Jun 2025 00:13:00 +0000 https://www.jinpinlub.net/?post_type=product&p=1613 Recurso

1. High pressure and high efficiency design
The vane pump adopts a double-vane structure design, with a main pump cartridge displacement of 42cc/rev (B42) and a secondary pump cartridge displacement of 31cc/rev (B31). Its maximum working pressure can be regarded as 280 bar, and therefore it is fit for high-output pressure equipment such as industrial machine tools and heavy equipment. The volumetric efficiency and mechanical efficiency are both above 94%, reducing energy loss and system heating, and the speed can be as low as 600 RPM, which is suitable for energy-saving or low-speed and high-torque scenarios.
2. Low noise and anti-pollution ability
The hydraulic pump controls the pressure pulsation within ±2 bar, which deeply reduces both pipeline vibration and noise. The dual-vane technology adopted enhances the ability to resist particle contamination, able to adapt to harsh working environments and reduce wear and failure due to impurities.
3. Wide speed range and fast response
T67DC supporting a speed of 600 to 3600 RPM provides flexibility to match the output characteristics of different power sources, namely motors or engines. Its fast response capability to pressure cycles, such as changes between high and low pressure circuits, is built to achieve flow repeatability error of less than 1.0%. This indicates a high level of control accuracy is supported in the cases where machine tools or automated production are included.

Maintenance

– High anti-pollution ability: The T67DC vane pump has a double-lip design of the vane, which can be used to improve the seal between the vane and stator and improve particle pollution resistance.
– Simple to maintain: Because the T67DC hydraulic pump is based on the modular design, all you have to do when maintaing it is to remove the pump core assembly from the pump housing for inspection, repair or replacement. In addition, the connection between the various components of the T67DC pump is simple, which is easy to disassemble and install.
-Oil cleanliness requirements: The oil cleanliness level is required to reach ISO 4406 18/16/13, that is, the solid particle size ≥5μm and the content ≤1280/mL are allowed, and it is suitable for NAS 8-level filtration system. Users need to regularly check and replace the hydraulic oil filter to reduce the wear of impurities on the internal components of the pump.
-Regular maintenance items: including regular inspection and maintenance to check whether the mounting bolts of the vane pump are loose, whether the oil level and quality are normal, whether the filter is blocked, and whether the operating sound and temperature of the pump are abnormal.

Download

Ficha Técnica - Bomba de Palheta Dupla T6/T7

]]> https://www.jinpinlub.net/pt/product/denison-high-pressure-hydraulic-industry-double-vane-pump-t6cc-025-017/ Sun, 15 Jun 2025 06:18:02 +0000 https://www.jinpinlub.net/?post_type=product&p=1589 Recurso

– High efficiency and high pressure: The T6CC vane pump’s structure is lightweight and compact, the power-to-weight ratio is high, the installation is flexible, and the rated working pressure is up to 275 bar, which can reduce the size of hydraulic actuators and pipelines and lower installation costs.
– Double high efficiency: The hydraulic vane pump’s volumetric efficiency and mechanical efficiency are both about 0.94, the energy loss is low, the system heat is reduced, and the operating cost is reduced.
– Double combination: Vane pump is composed of 025 and 017 displacement pump cartridges, and can provide a variety of flow combinations on demand; the 12-vane design makes the flow pulsation small, the output stable, and adaptable to different working conditions.
– Anti-pollution and balanced structure: The double-lip vanes enhance the ability to resist particle pollution, and the hydraulic balance design reduces shaft and bearing wear and extends the service life.
– Mother-and-child vanes + 12 vanes: The vane pump’s inherent low-noise structure is matched with an optimized design, the operating noise is low, and the working environment is improved.
– Flexible and convenient: The inlet/outlet oil port can be oriented in 4 positions, and the double vane pump has 32 installation combinations; the cartridge kit is separated from the drive shaft, and the pump does not need to be disassembled during maintenance, and the flow components can be quickly replaced on site.
– Wide speed range: This kind of industrial vane pump is 600-2800 rpm, suitable for low temperature conditions, low power consumption and no risk of jamming, stable and reliable operation.

Installation

–  Cleaning inspection: Clean the installation surface and pipelines thoroughly to ensure that there are no impurities such as oil stains and iron filings. Check whether the various parts of the pump body are intact and whether the vanes of the hydraulic pump are flexible.
– Installation direction: Determine the inlet and outlet position according to the design requirements to ensure that the installation combination of the double vane pump (32 optional) matches the system.
– Oil selection: Use hydraulic oil that meets the specifications, and the viscosity and cleanliness must meet the standards. Filter the oil according to the requirements of the manual to avoid contamination and wear of the vane pump vanes.
– Direction and speed: Confirm that the motor direction is consistent with the hydraulic pump logo, and the speed is controlled within the range of 600-2800 rpm. Preheat the oil when starting at low temperature to prevent jamming.
– Initial start: Fill the vane pump with hydraulic oil before starting, drain the air in the pipeline, run at low speed for 5-10 minutes, check for abnormal noise, leakage or overheating, and gradually increase the pressure after the hydraulic system stabilizes.

Download

Ficha Técnica - Bomba de Palheta Dupla T6/T7

]]>