T6/T7 Series Vane Pump – Jinpinlub.net

275 bar Hydraulic vane pump T6C single oil pump for die casting machine

Jinpinlub HYD — Tue, 01 Jul 2025 14:08:26 +0000

Feature

The T6C series single vane pump is a high-performance hydraulic pump from Denison. It has a modular design, and it can be used in high-pressure, low-noise, and high-efficiency industrial hydraulic applications. It’s compact structure and flexibility for installation have made it useful for metallurgy, injection molding, engineering machinery, machine tools and other applications.
Performance Characteristics:
Vane pump has high working pressure: rated pressure is up to 275 bar (max 310 bar), and suitable for high-load conditions.
Industrial hydraulic pump has high volumetric efficiency: typical volumetric efficiency is 0.94, and remaining stable under high pressure keeps power consumption lower and heat generation down.
Wide-range of speed: standard type can achieve 600-2800 rpm; vehicle type can be as low as 400 rpm to meet any equipment configurations.
T6C vane pump has low noise features: small pulsation of pressure (about ±2 bar), can significantly reduce noise of the hydraulic system, and provide better stability of the hydraulic system.
Good anti-pollution ability: with the double-lips structure blades, the vanes can better withstand oil contamination before causing harmful results to the pump and extend the lifespan of the pump body.

T6c single vane pump

Notes

1. Before starting the T6C single pump, one must put some clean hydraulic oil into the pump body and fill it up.
2. Check that the direction of rotation of the single vane pump is consistent with the arrow for rotation direction indicated by the motor.
3. During start-up of the hydraulic pump for the first time or after a long shutdown, it sometimes may be hard to absorb oil for the hydraulic pump. Hence, an exhaust valve should be installed at the outlet of the pump or the oil outlet pipe joint should be loosened for exhausting the air. It should try to be started under no-load conditions.
4. The air mixed in the pump and pipeline would do noise and vibrations. Therefore, they should repeatedly do no-load starts and stops of the pump to exhaust air.
5. For oil pumps with servo motor drive, low speed should be selected first for the motor (pressure mode is switched to speed mode) from the servo driver, and the motor shall be run at low speed for about 3-5 minutes to exhaust the air and then could be switched back to normal speed after the oil pump has sounded normally.

Download

Datasheet - T6/T7 Double Vane Pump

Wholesale 280bar T67DC Series Parker Hydraulic Double Vane Pump OEM ODM

Jinpinlub HYD — Mon, 16 Jun 2025 00:13:00 +0000

Feature

1. High pressure and high efficiency design
The vane pump adopts a double-vane structure design, with a main pump cartridge displacement of 42cc/rev (B42) and a secondary pump cartridge displacement of 31cc/rev (B31). Its maximum working pressure can be regarded as 280 bar, and therefore it is fit for high-output pressure equipment such as industrial machine tools and heavy equipment. The volumetric efficiency and mechanical efficiency are both above 94%, reducing energy loss and system heating, and the speed can be as low as 600 RPM, which is suitable for energy-saving or low-speed and high-torque scenarios.
2. Low noise and anti-pollution ability
The hydraulic pump controls the pressure pulsation within ±2 bar, which deeply reduces both pipeline vibration and noise. The dual-vane technology adopted enhances the ability to resist particle contamination, able to adapt to harsh working environments and reduce wear and failure due to impurities.
3. Wide speed range and fast response
T67DC supporting a speed of 600 to 3600 RPM provides flexibility to match the output characteristics of different power sources, namely motors or engines. Its fast response capability to pressure cycles, such as changes between high and low pressure circuits, is built to achieve flow repeatability error of less than 1.0%. This indicates a high level of control accuracy is supported in the cases where machine tools or automated production are included.

T67DC-B42-031 vane pumps (5)

T67DC-B42-031 vane pumps (6)

Maintenance

– High anti-pollution ability: The T67DC vane pump has a double-lip design of the vane, which can be used to improve the seal between the vane and stator and improve particle pollution resistance.
– Simple to maintain: Because the T67DC hydraulic pump is based on the modular design, all you have to do when maintaing it is to remove the pump core assembly from the pump housing for inspection, repair or replacement. In addition, the connection between the various components of the T67DC pump is simple, which is easy to disassemble and install.
-Oil cleanliness requirements: The oil cleanliness level is required to reach ISO 4406 18/16/13, that is, the solid particle size ≥5μm and the content ≤1280/mL are allowed, and it is suitable for NAS 8-level filtration system. Users need to regularly check and replace the hydraulic oil filter to reduce the wear of impurities on the internal components of the pump.
-Regular maintenance items: including regular inspection and maintenance to check whether the mounting bolts of the vane pump are loose, whether the oil level and quality are normal, whether the filter is blocked, and whether the operating sound and temperature of the pump are abnormal.

Download

Datasheet - T6/T7 Double Vane Pump

Denison High Pressure Hydraulic Industry Double Vane Pump T6CC-025-017

Jinpinlub HYD — Sun, 15 Jun 2025 06:18:02 +0000

Feature

– High efficiency and high pressure: The T6CC vane pump’s structure is lightweight and compact, the power-to-weight ratio is high, the installation is flexible, and the rated working pressure is up to 275 bar, which can reduce the size of hydraulic actuators and pipelines and lower installation costs.
– Double high efficiency: The hydraulic vane pump’s volumetric efficiency and mechanical efficiency are both about 0.94, the energy loss is low, the system heat is reduced, and the operating cost is reduced.
– Double combination: Vane pump is composed of 025 and 017 displacement pump cartridges, and can provide a variety of flow combinations on demand; the 12-vane design makes the flow pulsation small, the output stable, and adaptable to different working conditions.
– Anti-pollution and balanced structure: The double-lip vanes enhance the ability to resist particle pollution, and the hydraulic balance design reduces shaft and bearing wear and extends the service life.
– Mother-and-child vanes + 12 vanes: The vane pump’s inherent low-noise structure is matched with an optimized design, the operating noise is low, and the working environment is improved.
– Flexible and convenient: The inlet/outlet oil port can be oriented in 4 positions, and the double vane pump has 32 installation combinations; the cartridge kit is separated from the drive shaft, and the pump does not need to be disassembled during maintenance, and the flow components can be quickly replaced on site.
– Wide speed range: This kind of industrial vane pump is 600-2800 rpm, suitable for low temperature conditions, low power consumption and no risk of jamming, stable and reliable operation.

T6CC vane pump series (1)

T6CC vane pump series (2)

Installation

– Cleaning inspection: Clean the installation surface and pipelines thoroughly to ensure that there are no impurities such as oil stains and iron filings. Check whether the various parts of the pump body are intact and whether the vanes of the hydraulic pump are flexible.
– Installation direction: Determine the inlet and outlet position according to the design requirements to ensure that the installation combination of the double vane pump (32 optional) matches the system.
– Oil selection: Use hydraulic oil that meets the specifications, and the viscosity and cleanliness must meet the standards. Filter the oil according to the requirements of the manual to avoid contamination and wear of the vane pump vanes.
– Direction and speed: Confirm that the motor direction is consistent with the hydraulic pump logo, and the speed is controlled within the range of 600-2800 rpm. Preheat the oil when starting at low temperature to prevent jamming.
– Initial start: Fill the vane pump with hydraulic oil before starting, drain the air in the pipeline, run at low speed for 5-10 minutes, check for abnormal noise, leakage or overheating, and gradually increase the pressure after the hydraulic system stabilizes.

Download

Datasheet - T6/T7 Double Vane Pump